Project: 1978
Ford
F-100
Status: In-Progress
History
and Facts
Here are some facts about the 1978 Ford F-100:
Dimensions
The height of the 1978 Ford F-100 is 1796 mm from the ground to the top of the car, and the width is 1960 mm. The length can vary from 4879 mm to 4953 mm depending on the model.
Towing capacity
The towing capacity of the 1978 Ford F-100 can range from 0 kg to 1800 kg. Some models may have heavy-duty or towing option packs that can increase the towing capacity.
Engine
The 1978 Ford F-100 had a 302 Cleveland V8 engine and a 4.1-liter inline 6-cylinder engine.
Suspension
The front suspension of the 1978 Ford F-100 has coil springs and shock absorbers, while the rear suspension has leaf springs, shock absorbers, and a stabilizer bar.
Wheels and tires
The 1978 Ford F-100 has 15 x 6JK wheels with 5 studs as standard, and 7.00 x 15 x 8 PR tires with an all-purpose lugtread pattern.
Fuel tank
The 1978 Ford F-100 has a fuel tank capacity of 72 liters (16 gallons).
Wheelbase
The 1978 Ford F-100 has a wheelbase of 2972 mm (117 in) or 3380 mm (133 in).
Grille
The 1978 Ford F-100 had a redesigned grille that was similar to the heavy-duty Louisville line L-series grille.
Headlights
All series except the top trim line, the Lariat package, had Ford's first use of rectangular headlights in their trucks
Mod Details:
Ford Performance 460 Boss Crate Motor
ZF5 Speed Transmission
NP201
American Autowire Classic Update Harness
Edelbrock EFI Manifold
Holley Terminator ECU
Holley Dual Sync Distributor
Holley 100lb Fuel Injectors
Holley 1000CFM MPFI Throttle Body
Vintage Air AC System
Vintage Air Front Runner Kit
Battle Born Brakes Hydroboost Conversion Kit
Alpine Halo 11
Focal K-2 2-Way Component Speakers
2 10” TW3 JL Audio Sub Woofers
JL 900/5 Amp
Holley Retrobright Headlights
Horn Blasters Conductors Special Train Horns w/ Onboard Air
Before Prep and Paint
June 2024: Prep for Paint
The sender unit was replaced in the fuel tank.
Fuel tank reinstalled
New fenders were added and any dents and imperfections were worked to match the contours and body lines.
Holes were removed by welding new sections on
Nutserts were used for the driver and passenger mirrors
August 2024: Prep for Paint
**Was painted improperly, so we had to scrape and return it to have them repaint it**